Reflectors
Product Information
Reflectors help save lives. All our reflectors have a guaranteed reflective effect of at least ten years and are highly visible thanks to their prismatic design.
Reflectors:
6920, reflector 40 x 80 mm. Used on rescue ladders and ladder handles. Sold in packs of 50.
6921, reflector 40 x 130 mm. Used on rescue hooks. Sold in packs of 10.
6922, reflector 60 x 195 mm. Used on rescue post poles and rescue station poles. Sold in packs of 10.
6923, set with all reflectors for the RR3 rescue raft.
6924, reflector RESCUE LADDER indicates what the equipment is to be used for. Sold in packs of 10 for retrofitting on rescue ladders.
6925, reflector RESCUE HOOK indicates what the equipment is to be used for. Sold in packs of 10 for retrofitting on rescue hooks.
Product overview
Plates and tubes:
6931, reflector plate 50 x 500 mm with 4 reflectors (40 x 80 mm). Used to show the person in distress where a rescue ladder is located. Mounted on either side of the ladder.
6932, reflector plate 50 x 7500 mm with 6 reflectors (40 x 80 mm). Used to show the person in distress where a rescue ladder is located. Mounted on either side of the ladder.
6933, Clip On is a tube with high-visibility yellow reflector that can be seen from a long distance in the dark and guides a person in distress to a rescue ladder. Pre-installed on new chain ladders, but this article number is intended for retrofitting on existing ladders with a slot. Sold in packs of 6.
New: 6935, angled reflector plate, 50 x 50 x 745 mm with 12 reflectors (40 x 80 mm). Used to show the person in distress where a rescue ladder is located. Very suitable for fixed ladders and visible from all directions. Mounted on either side of the rescue ladder with screws.
Shore Safety’s life-saving equipment complies with the requirements of the Swedish Civil Contingencies Agency (MSB).
Additional information
| Width | See product description |
|---|---|
| Length | See product description |
| Weight | – |
| Material: | Impact-resistant plastic with UV-stabilized surface |
| Color: | High-visibility yellow |
| Properties: | Prismatic, long-range visibility, water-resistant |
| Special | Temperature range:−30 °C – +80 °C |
Installation
6920, reflector 40 x 80 mm. Mounted on the stiles (sides) of rescue ladders and on ladder handles.
6921, reflector 40 x 130 mm. Used on rescue hooks. Mounted around the tube about 1 meter from the ends.
6922, reflector 60 x 195 mm. Used on rescue post poles and rescue station poles. Mounted at the top of the pole to be visible from a distance.
6923, set with all reflectors for the RR3 rescue raft. Mounted around the raft in specially recessed areas (see image).
6924, reflector RESCUE LADDER indicates what the equipment is to be used for. Mounted in the middle of the stiles (sides) of the rescue ladder.
6925, reflector RESCUE HOOK indicates what the equipment is to be used for. Mounted in the middle of the rescue hook.
Assembly instructions
Reflectors
Design Features
Sustainable & Safe Materials
We use durable, recyclable materials.
All aluminium, stainless steel, and plastics are selected to meet both environmental and safety standards. Every product follows MSB’s (The Swedish Civil Contingencies Agency) guidelines for rescue equipment. MSB is widely recognised for maintaining very high safety and quality standard
Built for Nordic Conditions
Our equipment is designed for the harsh coastal climate.
Every component—from metal fittings to reflective materials—is tested to endure salt, wind, and ice. Shore Safety’s products perform reliably year-round, even in extreme weather.
Visible When It Matters
High visibility saves lives.
Reflective markings and signal colors guide rescuers even in low light. The yellow elements are optimized for maximum contrast against water and urban backgrounds.
Proven Durability
Long-term performance is a part of our promise.
Our products are built to resist corrosion and UV exposure. Hot-dip galvanization, marine-grade aluminium, and weather-resistant plastics ensure many years of reliable service.
Related products
About Shore safety
SWEDISH HANDCRAFTED QUALITY FOR DECADES
Quality
Built for real conditions, not just specifications.
With decades of experience in waterside safety, our equipment is designed, tested, and manufactured in Sweden to perform where it matters most. Every product meets strict MSB requirements and is made to deliver reliable, long-term safety in demanding environments.
Warranty
Designed to last — and backed accordingly.
Our lifesaving equipment is engineered for durability, dependable performance, and minimal maintenance throughout its lifecycle. Tested under Nordic conditions, each product is built for long service life and consistent function, so you can trust it to be ready when needed.
Shipping
From our facility to yours — safely and efficiently.
All equipment is shipped directly from Sweden through trusted logistics partners. This ensures reliable delivery, consistent quality control, and predictable lead times, so products arrive secure, on time, and ready for installation.
FAQ
Common Questions
This FAQ is designed to help you find quick answers about Shore Safety’s high-visibility reflectors. Learn more about their lifespan, installation options, outdoor durability, and our fast delivery times. Our reflectors are developed for professional rescue environments and built to perform year after year.
Have any questions?
How long do the reflectors last?
Are the reflectors suitable for saltwater and outdoor use?
Yes. Our reflectors are designed specifically for coastal and harbor conditions. They are saltwater-, UV- and weather-resistant, ensuring long-term durability in any climate.
Can I retrofit these reflectors on existing rescue equipment?
Absolutely. We offer retrofit models for rescue ladders, hooks, poles, and raft stations. The reflectors come with adhesive or screw mounting options, depending on the model..
How quickly do you ship orders?
We are one of few suppliers that almost always have reflectors in stock. Most orders are packed and shipped within one week.
Reflectors
Product Information
Reflectors help save lives. All our reflectors have a guaranteed reflective effect of at least ten years and are highly visible thanks to their prismatic design.
Reflectors:
6920, reflector 40 x 80 mm. Used on rescue ladders and ladder handles. Sold in packs of 50.
6921, reflector 40 x 130 mm. Used on rescue hooks. Sold in packs of 10.
6922, reflector 60 x 195 mm. Used on rescue post poles and rescue station poles. Sold in packs of 10.
6923, set with all reflectors for the RR3 rescue raft.
6924, reflector RESCUE LADDER indicates what the equipment is to be used for. Sold in packs of 10 for retrofitting on rescue ladders.
6925, reflector RESCUE HOOK indicates what the equipment is to be used for. Sold in packs of 10 for retrofitting on rescue hooks.
Product overview
Plates and tubes:
6931, reflector plate 50 x 500 mm with 4 reflectors (40 x 80 mm). Used to show the person in distress where a rescue ladder is located. Mounted on either side of the ladder.
6932, reflector plate 50 x 7500 mm with 6 reflectors (40 x 80 mm). Used to show the person in distress where a rescue ladder is located. Mounted on either side of the ladder.
6933, Clip On is a tube with high-visibility yellow reflector that can be seen from a long distance in the dark and guides a person in distress to a rescue ladder. Pre-installed on new chain ladders, but this article number is intended for retrofitting on existing ladders with a slot. Sold in packs of 6.
New: 6935, angled reflector plate, 50 x 50 x 745 mm with 12 reflectors (40 x 80 mm). Used to show the person in distress where a rescue ladder is located. Very suitable for fixed ladders and visible from all directions. Mounted on either side of the rescue ladder with screws.
Shore Safety’s life-saving equipment complies with the requirements of the Swedish Civil Contingencies Agency (MSB).
Additional information
| Width | See product description |
|---|---|
| Length | See product description |
| Weight | – |
| Material: | Impact-resistant plastic with UV-stabilized surface |
| Color: | High-visibility yellow |
| Properties: | Prismatic, long-range visibility, water-resistant |
| Special | Temperature range:−30 °C – +80 °C |
Installation
6920, reflector 40 x 80 mm. Mounted on the stiles (sides) of rescue ladders and on ladder handles.
6921, reflector 40 x 130 mm. Used on rescue hooks. Mounted around the tube about 1 meter from the ends.
6922, reflector 60 x 195 mm. Used on rescue post poles and rescue station poles. Mounted at the top of the pole to be visible from a distance.
6923, set with all reflectors for the RR3 rescue raft. Mounted around the raft in specially recessed areas (see image).
6924, reflector RESCUE LADDER indicates what the equipment is to be used for. Mounted in the middle of the stiles (sides) of the rescue ladder.
6925, reflector RESCUE HOOK indicates what the equipment is to be used for. Mounted in the middle of the rescue hook.
Assembly instructions
Reflectors
Design Features
Sustainable & Safe Materials
We use durable, recyclable materials.
All aluminium, stainless steel, and plastics are selected to meet both environmental and safety standards. Every product follows MSB’s (The Swedish Civil Contingencies Agency) guidelines for rescue equipment. MSB is widely recognised for maintaining very high safety and quality standard
Built for Nordic Conditions
Our equipment is designed for the harsh coastal climate.
Every component—from metal fittings to reflective materials—is tested to endure salt, wind, and ice. Shore Safety’s products perform reliably year-round, even in extreme weather.
Visible When It Matters
High visibility saves lives.
Reflective markings and signal colors guide rescuers even in low light. The yellow elements are optimized for maximum contrast against water and urban backgrounds.
Proven Durability
Long-term performance is a part of our promise.
Our products are built to resist corrosion and UV exposure. Hot-dip galvanization, marine-grade aluminium, and weather-resistant plastics ensure many years of reliable service.
Related products
About Shore safety
SWEDISH HANDCRAFTED QUALITY FOR DECADES
Quality
Built for real conditions, not just specifications.
With decades of experience in waterside safety, our equipment is designed, tested, and manufactured in Sweden to perform where it matters most. Every product meets strict MSB requirements and is made to deliver reliable, long-term safety in demanding environments.
Warranty
Designed to last — and backed accordingly.
Our lifesaving equipment is engineered for durability, dependable performance, and minimal maintenance throughout its lifecycle. Tested under Nordic conditions, each product is built for long service life and consistent function, so you can trust it to be ready when needed.
Shipping
From our facility to yours — safely and efficiently.
All equipment is shipped directly from Sweden through trusted logistics partners. This ensures reliable delivery, consistent quality control, and predictable lead times, so products arrive secure, on time, and ready for installation.
FAQ
Common Questions
This FAQ is designed to help you find quick answers about Shore Safety’s high-visibility reflectors. Learn more about their lifespan, installation options, outdoor durability, and our fast delivery times. Our reflectors are developed for professional rescue environments and built to perform year after year.
Have any questions?
How long do the reflectors last?
Are the reflectors suitable for saltwater and outdoor use?
Yes. Our reflectors are designed specifically for coastal and harbor conditions. They are saltwater-, UV- and weather-resistant, ensuring long-term durability in any climate.
Can I retrofit these reflectors on existing rescue equipment?
Absolutely. We offer retrofit models for rescue ladders, hooks, poles, and raft stations. The reflectors come with adhesive or screw mounting options, depending on the model..
How quickly do you ship orders?
We are one of few suppliers that almost always have reflectors in stock. Most orders are packed and shipped within one week.